FL310 Pulse Oximeter with Vibration Alarm for IOS and Android

Wearable Pulse Oximeter: The soft ring sensor comfortably fits on the user’s finger. The FL310 doesn't provide readings during sport activities.

Continuous Monitoring for Oxygen Level & Heart Rate: Continuous monitoring and recording blood oxygen level, heart rate and motion. Continuous use for up to 16 hours.

Free APP for Android and iOS: The free app shows a graphic trend report of blood oxygen saturation, heart rate, and motion. Data analysis can help the user avoid unhealthy conditions and improve their lifestyle.

Smart Vibration Alarm for Low Blood Oxygen Levels: the FL310 can detect changes in O2 levels and activate a vibration when blood oxygen levels lower than the threshold range are detected, preventing a low-oxygen status. FL310 cannot be used for sleep breathing problems. 

Package Includes: FL310 Pulse Oximeter, USB cable, User guide, 1 year worry-free warranty, and our friendly customer service.

This FL310 Pulse Oximeter is much easier to use than a conventional fingertip oxygen monitor when exercising. Only a 10-second rest is needed for a measurement when hiking/walking/exercising. If oxygen levels are not within their normal range, it is recommended to either rest for a few minutes or continue moving until oxygen levels are normal.

Smart Vibration and Ring Sensor

The smart sensor will send a notification if your blood oxygen level drops below the threshold range preset on the app (adjustable vibration threshold 80%-95%).

Patented Ring Sensor

The FL310 was designed for comfort and continuous use. The patented ring sensor allows you to wear your device wherever you are, and it will never fall off from your fingers, even while walking.

Blood Oxygen Saturation Report

Graphics for the FL310 show O2 saturation & Heart Rate trends that are useful for personal health tracking.

The report cannot show oxygen changes under a few seconds in length, therefore it can't be used for sleep breathing problems.

Continuous Monitoring for Oxygen level & Heart Rate

Continuous monitoring and recording blood oxygen levels, heart rate, and motion. The high-efficiency Li-ion battery lasts for up to 16 hours of continuous recording.

---

Viatom ViHealth Mobile App

Question: 

Is it possible to get the data? Or is the only data available the pictures produced by the App? 

Answer: The data can only be shared by screenshot at this time.  

Question: 

Is the vihealth android app working for you? Mine only shows "checkmeo2," "snoreo2," and "sleepo2," but not "wearo2" in device list. I also can't connect?! 

Answer: The Vihealth app is compatible with Android and iOS mobile phones. please check your app version and update to the latest version. 

Question: 

What is the specific difference between the wear02 and the sleep02 (lookee) product? Can wear02 indicate sleep apnea? Why not? 

Answer: WearO2 is for daily use and SleepO2 is for sleep use. They work in the same way, the only difference is the report. WearO2 report out O2 every 1 min, so it can't indicate sleep apnea.  

Question: 

What is the difference between data collected with the FL310/WearO2 and the sleepu other then the ability to download data from the sleepu to your computer? 

Answer:  SleepU provides a more detailed data report, and WearO2 records the data every 1 min. SleepU records the data every 4s, so SleepU can be used to predict apnea but WearO2 can't.  

Question: 

Is the SpO2 calculated continuously or at 1 minute increments? 

Answer: Continuously, it displays it on the device and your phone in real time.  

Question: 

Is this instrument water resistant? Will it have to be removed in order for me to wash my hands or if it starts raining? 

Answer: 

WearO2 is IP64 rated. The orange silicone brand can prevent water entering the device. There is no problem wearing the device when washing hands for a short time or when it is raining, but please do not put the device into the water and wash it for a long time.  

Question: 

Does it sync with Apple Health app? 

Answer: 

Now the device can't sync with Apple Health app. We are still working to make it better, maybe will available in the near future. 

Question: 

I absolutely love this product. The grey ring part has stretched and is now larger. Is there a way to reinforce it. afraid it will slip off & be lost 

Answer: 

Please don't squeeze the sensor part or apply excessive force on it. Wear the device on your thumb finger, index finger as an option in case of too tight for thumb. Try to move the sensor along the forefinger to find out a best fit. This can protect the sensor.  

Question: 

can two iphone monitor at the same time? 

Answer: 

It can only connect with one phone at the same time. 

Question: 

Is the battery replaceable? 

Answer: 

The battery is built-in and rechargeable, so it is not replaceable. But the battery is durable, please feel free to purchase it. 

Question: 

Can i be alerted for too much oxygen, rather than not enough (for copd patients)? 

Answer: 

Sorry to tell you that it can't alert for too much oxygen. It only alert when the readings is below the threshold you set.  

Question: 

how much data can it store in the app? 

Answer: There is no limitation, it depends on your phone.  

Question: 

Does this show daily reporting? 

Answer: 

It will report when turn off and turn on again. 

the app for WearO2 pulse oximeter shows daily reporting 

Question: 

Is this new?  is it all self contained on the finger or is there a wrist band too. 

Answer: 

Yes, it is our new product. It is all self contained on the finger like a ring, you don't need any extra wrist band or cord, that makes you more comfortable. Any problem, please feel free to contact us.  

Question: 

Do you know of a good Oxygen sensor for infants or toddlers to wear? 

Answer: 

The ring for WearO2 may too large for infants or toddlers, the new products for baby are still in design and will be available soon.  

Question: 

Can I have 2 of these synced to the app at the same time? 

Answer: 

You can connect the two devices to the same APP, but you can not sync them at the same time. Once you connect one, the other one will be disconnected. Hope this can help you.  

Question: 

Can the display be set to remain on constantly for the visual feedback for home aids? 

Answer: 

The display cannot be set to always be on, but it will still work even if the display is off. If you want to check the reading, please click the button.  

Question: 

Do you supply software for downloading the recorded data to a PC with windows 10? 

Answer: 

Sorry to tell you that WearO2 don't have PC software, but it comes with an APP solution, you can check your report on your phone. And our new product SleepU come with the PC software solution that you can download your report to your PC.  

Question: 

moms in rehab place with wifi, does it transmit over internet to my iphone? 

Answer: 

It connects with phone through Bluetooth, can't transmit over the internet. But you can share the report as a screenshot. 

Question: 

How to recharge the battery of this product, I can't find the place on device to put the cable? 

Answer: 

1.Remove the rubber orange band that wraps the perimeter of the unit and you will see a mini usb port. 

2.You will notice a USB symbol on the broad end of the orange band going around the device. Gently pull the band at this spot and slide to one side. The USB port should now be exposed.  

Question: 

Can data be exported fron android app? perhaps into csv, or similar file format? 

Answer: The WearO2 pulse oximeter can't export data from app, but you can share the report in picture/screenshot. Should you have more question please let us know and we will be more than happy to assist.  

Question: 

Can you turn off the alarms? 

Answer: 

You can turn off or turn on the alarms in your APP. You can also adjust the threshold and intensity of the vibration in your APP.  

Question: 

How can i delete data from the app? I did trials to get familiar with the instrument and app and it is junk data. I am using an ipad. 

Answer: 

Slide left on the data you want to delete, the " delete" will show up.  

Question: 

Would this work on babies? 

Answer: 

Hi, it can't work on babies. The ring sensor is designed for adults.  

Question: 

is it compatable with the Iphone 10X? 

Answer: 

Yes, the WearO2 compatible with the iphone 10X.  

Question: 

If I hike and do not take my phone can I turn off the device and then turn on when I get around my phone will the data still transfer to the phone?  

ANSWER: YES. 

Question: 

If the device powers down (the screen is blank without readings) is the device still reading oxygen/pulse levels if I stop moving for a reading? 

ANSWER: YES.